Furuno FAX-30 Bedienungsanleitung PDF herunterladen (Seite 79)

6. MAINTENANCE, TROUBLESHOOTING

6-7

6.8 All Clear (for technicians only)

If the FAX-30 cannot be operated from the NavNet display unit, do the following:

1. Unplug the power connector from the FAX-30.

2. Open the cover.

FAX-30, cover opened

3. Turn on the #1 segment of S1 on the MAIN board (08P3218).

4. Connect the power connector and turn on the NavNet display unit.

5. Confirm that the LED on the FAX-30 is flashing.

6. Turn off the NavNet display unit and disconnect the FAX-30’s power cable.

7. Turn off the #1 segment of S1.

8. Close the cover and reconnect the power cable.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 114 115

FACSIMILE RECEIVER 1
PUB. No. OME-62600 2
SAFETY INSTRUCTIONS 3
ELECTRICAL SHOCK HAZARD 4
TABLE OF CONTENTS 5
FOREWORD 8
Operational Characteristics 9
Windows XP # # OK # # OK 10
SYSTEM CONFIGURATION 11
PC installation 12
EQUIPMENT LISTS 13
Optional supply 14
1. OVERVIEW, SETUP 15
1.1.5 Receive notification 19
1.2 Overview, Setup: PC 20
1.2.3 Logging out 22
2. FAX OPERATION: NAVNET 23
Wrong Speed or IOC and Image 28
2.3 Timer Receiving 29
CLEAR ALL 33
Note: If date or time 34
ZDA is output 34
Example of phase mismatching 35
IMAGE soft key 35
2.5.4 Image color 37
EDIT WX FAX STATION 40
EDIT NAVTEX STATION 40
FAX-30 SYSTEM SETUP 40
REVERSE IMAGE 41
3. FAX OPERATION: PC 43
3.2 Timer Receiving 44
TIMER PROGRAM No.2 45
3.4.1 Phase mismatch 48
3.4.3 Noise rejection 49
3.4.4 Image color 50
3.4.6 Rotating images 51
3.4.7 Zooming images 51
3.4.8 Saving images 51
< back 52
EDIT STATION LIST 53
4. NAVTEX OPERATION: NAVNET 55
Appears when the mode is 56
ADD NAVTEX STATION 63
518 kHz STATION LIST 63
490 kHz STATION LIST 63
_ _ _ _ _ _ _ _ _ _ 64
5. NAVTEX OPERATION: PC 65
RX SETUP 66
490kHz STATION LIST 68
5.5 Adding Navtex Stations 69
5.6 Editing Navtex Stations 70
6. MAINTENANCE 73
TROUBLESHOOTING 73
6.2 Replacement of Fuse 74
6.3 Troubleshooting 74
6.4 Diagnostics: NavNet 75
6.5 Diagnostics: PC 76
6.6 Clearing Data: NavNet 77
6.7 Clearing Data: PC 78
6.9 Simulation Mode 80
SIMULATION SETUP 81
7. INSTALLATION 83
7.2 Antenna Unit 84
7.3 Wiring 86
MAIN Board 08P3218 88
RCV Board 08P3219 88
7.5 Browser, PC Settings 89
7.5.2 PC settings 90
APPENDIX 91
FACSIMILE STATION LIST 92
Navtex Stations 94
Navtex stations list 95
Menu Tree 99
MENU key 100
PC Menu tree 101
Navtex menu tree 102
SP - 1 E6260S01A 103
ＰＡＣＫＩＮＧ　ＬＩＳＴ 105
ＰＡＣＫＩＮＧ　ＬＩＳＴＰＡＣＫＩＮＧ　ＬＩＳＴ 105

Kommentare zu diesen Handbüchern

Keine Kommentare

Furuno FAX-30 Bedienungsanleitung Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Faxe Furuno FAX-30