Furuno GP-1850WD Bedienungsanleitung

COLOR DGPS/PLOTTERCOLOR GPS/PLOTTERGP-1850WD, GP-1850W FURUNO/NAVIONICSGP-1850WD, GP-1850W FURUNO/C-MAP NT

1. OPERATIONAL OVERVIEW 1-2 1.2 Remote Controller MOBSAVE ALARMSW 1SW 2SW 3SW 4SW 5SHOWHIDEBRILLTONEXTE/HIWAYPLOTWPTRTECENTERZOOM IN/OUTMENUABC 1JK

1. OPERATIONAL OVERVIEW 1-31.3 Inserting Mini Chart Card Insert appropriate mini chart card before turning on the power. Note: Static electricity

1. OPERATIONAL OVERVIEW 1-4 When the satellite signal is being received normally, the GP-1850WD/1850W displays various abbreviations at the bottom

1. OPERATIONAL OVERVIEW 1-51.6 Plotter Displays Press the [PLOT] key. Each time this key is pressed, the display mode changes in the sequence shown

1. OPERATIONAL OVERVIEW 1-6 1.8 Menu Operation, Soft Keys Most operations are carried out through the menu which is opened and closed with the [ME

1. OPERATIONAL OVERVIEW 1-71.9 Demonstration Display The demonstration display provides simulated operation of this unit. On the plotter display, o

1. OPERATIONAL OVERVIEW 1-8 This page is intentionally left blank.

2-12. PLOTTER DISPLAYS2.1 Presentation Modes The plotter display mainly shows chart, ship’s track, waypoints, and navigation data. Three types of di

2. PLOTTER DISPLAYS 2-22.2 Cursor Turning on the cursor, shifting the cursor Press the cursor pad to turn the cursor on, and the cursor appears at t

2. PLOTTER DISPLAYS 2-32.5 Selecting Chart Scale/Range Chart scale (range) may be selected with the ZOOM IN or ZOOM OUT soft key. ZOOM IN expands

Your Local Agent/DealerYour Local Agent/Dealer9-52 Ashihara-cho,9-52 Ashihara-cho,Nishinomiya, JapanNishinomiya, JapanTelephone :Telephone : 0798-65-2

2. PLOTTER DISPLAYS 2-4 Sample chart (Japan and South Korea) showing indices Remarks on chart display A chart will not be displayed in the followin

2. PLOTTER DISPLAYS 2-5Aid to navigation data Selected FURUNO and NAVIONICS mini chart cards can show buoy and lighthouse data. Simply place the cu

2. PLOTTER DISPLAYS 2-62.7 Navigation Data Display The navigation data display provide generic navigation data and DGPS/GPS information. Press the

2. PLOTTER DISPLAYS 2-7Beacon information display The DGPS beacon receiver-equipped model, can show DGPS reference station information. Press the B

2. PLOTTER DISPLAYS 2-8How to read the XTE indication The black boat-shaped mark shows own boat’s movement and direction, and the amount to steer to

2. PLOTTER DISPLAYS 2-92.10 Changing Operation Mode Operation mode can be changed among PLEASURE, FISHING1 and FISHING2. FISHING1 or 2 mode provide

2. PLOTTER DISPLAYS 2-10 Selecting fishing 1, fishing 2 mode 1. Press the [MENU] key and the DISPLAY OPTIONS soft key. The display setup1 menu appe

3-13. TRACK3.1 Displaying Track 1. Press the [MENU] key to open the main menu. MENUDGPS 3DCHART SETUP OPTIONSGPS/DGPS/TD OPTIONSDISPLAY OPTIONSCONFI

3. TRACK 3-2When the fishing mode is selected, you can stop or restart plotting the track with the soft key only on the plotter display. Press the

3. TRACK 3-3Track plotting interval 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and TRACK CONTROL soft keys. 2. Press ▲ or ▼ to se

i SAFETY INSTRUCTIONSDo not disassemble or modify the equipment.Fire, electrical shock or serious injurycan result.Do not open the equipment.Imm

3. TRACK 3-43.6 Erasing Tracks Be absolutely sure you want to erase track; erased track cannot be restored. Erasing tracks by area You can erase t

4-14. MARKYou can enter marks to denote important locations, such as a good fishing spot. In the default condition, you may enter 3000 marks. 4.1 E

4. MARK 4-24.2 Changing Mark Attributes You can select shape, line and color of marks and lines on the plotter display. 1. Press the [HIDE/SHOW]

4. MARK 4-34.3 Changing Mark Size Mark size can be selected from STD (standard) and SMALL. 1. Press the [MENU] key to display the main menu. 2.

4. MARK 4-44.5 Displaying Track and Mark Points Number of track and mark points used appears in the TRACK STATUS window on the TRACK CONTROL displ

5-15. WAYPOINTS5.1 Entering Waypoints In navigation terminology, a waypoint is a particular location on a voyage whether it be a starting, intermedia

5. WAYPOINTS 5-22. Press the WAYPOINTS soft key to display the WAYPOINTS menu. WPTDGPS 3DLOCAL LISTWAYPOINT BY CURSORALPHA/NUMERIC LISTWAYPOINT B

5. WAYPOINTS 5-3Changing waypoint name, comment, proximity alarm radius 1. If necessary, you can change the name (up to 6 characters), comment (up

5. WAYPOINTS 5-4Entering waypoints by latitude and longitude position 1. Press the [WPT/RTE] key to open the WAYPOINT & ROUTE menu. 2. Press

5. WAYPOINTS 5-55.3 Changing Waypoint Data You can change the waypoint data through the waypoint list. 1. Press the [WPT/RTE] key, WAYPOINTS, and

ii TABLE OF CONTENTSFOREWORD ... iv SYSTEM CONFIGURATION ... v WHAT IS WAAS?... vi 1. O

5. WAYPOINTS 5-65.5 Waypoint Mark Size You may change the size of all waypoint marks to small or large (default), or turn them off. 1. Press the

6-16. ROUTESOften a trip from one place to another involves several course changes, requiring a series of route points (waypoints) which you navigate

6. ROUTES 6-24. If desired you can change the route name shown and/or add a comment. To change route name, press the [CLEAR] key to clear the rout

6. ROUTES 6-36.3 Inserting, Removing Waypoints Inserting waypoints through the route list Waypoints can be inserted in routes as follows: 1. Pres

6. ROUTES 6-4Inserting waypoints on the plotter display Inserting waypoints before the first waypoint or after the last waypoint 1. Press the [WPT

6. ROUTES 6-56.4 Creating Track-based Routes You can create routes based on your ship’s track by entering waypoints at own ship’s position. This fe

6. ROUTES 6-67. Press the [SAVE/MOB] key with a touch-and-release action to enter a waypoint mark at own ship position. A new waypoint is created

7-17. NAVIGATION7.1 Navigating to “Quick Points” The “quick point” feature allows you to navigate to point(s) without retaining the data indefinitely

7. NAVIGATION 7-27.2 Navigating to Waypoints (waypoint list) 1. Press the [WPT/RTE] key to open the WAYPOINT & ROUTE menu. 2. Press the WAYP

7. NAVIGATION 7-3▼SELECT PORT SERVICE Sample port service list 8. If you selected PORT at step 7, use the cursor pad to select a port

TABLE OF CONTENTS iii10. CUSTOMIZING YOUR UNIT 10.1 CHART SETUP OPTIONS menu 10-1 10.2 DISPLAY OPTIONS menu...10-3 10.3 GPS/DGPS/TD OPTI

7. NAVIGATION 7-47.4 Following a Route 1. Press the [WPT/RTE] key followed by the ROUTE soft key to open the route list. 2. Press ▲ or ▼ to selec

7. NAVIGATION 7-5Setting speed for ETA calculation Speed, which may be input manually or automatically, is required to calculate ETA (Estimated Tim

7. NAVIGATION 7-67.5 Canceling Navigation 1. Press the [WPT/RTE] key. 2. Press the LOG soft key. 3. Press the STOP soft key. 4. Press the [EN

8-18. PLOTTER ALARMS8.1 Introduction There are five plotter-related alarms which generate both audible and visual alarms: Arrival alarm, Anchor Watch

8. PLOTTER ALARMS 8-28.3 Arrival Alarm The arrival alarm informs you that your boat is approaching a destination waypoint. The area that defines an

8. PLOTTER ALARMS 8-38.5 XTE (Cross Track Error) Alarm The XTE alarm warns you when your boat is off its intended course. When the XTE alarm is ac

8. PLOTTER ALARMS 8-48.8 Alarm Information When an alarm setting has been violated the buzzer sounds and the speaker icon (shown in red) appears. Y

9-19. MEMORY CARD OPERATIONSThe following data can be saved to memory cards: • Mark/line • Waypoints/routes • Track • Configuration (menu settin

9. MEMORY CARD OPERATIONS 9-27. Press the [ENTER] key to format (or press the [CLEAR] key to escape). Now FORMATTING MEMORY CARD appears. Do not r

9. MEMORY CARD OPERATIONS 9-3Error messages Memory card not inserted Press the [ENTER] key to return to the SAVE DATA display. MEMORY CARD NOT INSE

iv FOREWORDA Word to GP-1850WD/1850W Owners Congratulations on your choice of the FURUNO GP-1850WD COLOR DGPS/PLOTTER, GP-1850W COLOR GPS/PLOTTER. We

9. MEMORY CARD OPERATIONS 9-4 NOW LOADING DATA FROMMEMORY CARD. DO NOT TURN OFF THE POWER UNTILLOADING COMPLETE. Load data message After loading i

10-110. CUSTOMIZING YOUR UNITThis section describes the various options which allow you to set up your unit to suit your needs. 10.1 CHART SETUP OP

10. CUSTOMIZING YOUR UNIT 10-2 CHART DETAILS menu 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and CHART DETAILS soft keys. DGPS 3D

10. CUSTOMIZING YOUR UNIT 10-310.2 DISPLAY OPTIONS menu This menu contains items for setting up the plotter displays. 1. Press the [MENU] key. 2.

10. CUSTOMIZING YOUR UNIT 10-4 MAG VARIATION The magnetic variations for all areas of the earth are preprogrammed into this unit. The preprogrammed

10. CUSTOMIZING YOUR UNIT 10-5GPS SETUP OPTIONS menu description This menu provides items for setting up the GPS receiver. To display it, display t

10. CUSTOMIZING YOUR UNIT 10-6 GPS SPEED AVE Calculation of ETA is based on average ship’s speed over a given period. If the period is too long or

10. CUSTOMIZING YOUR UNIT 10-7search, select MANUAL here, and use the cursor pad to select frequency of DGPS reference station. The default setting

10. CUSTOMIZING YOUR UNIT 10-8 Displaying DECCA TDs 1. Select DEC CHAIN and press the EDIT soft key to show the chain sta. pair window. CHAIN STA.

10. CUSTOMIZING YOUR UNIT 10-9FORMAT Selects NMEA0183 version 1.5 or 2.0. If you are unsure of the version number, try both equipment and choose th

v SYSTEM CONFIGURATION Ship's mains12-24 VDCExternal equipment(Autopilot, etc.)DGPS beacon receiver(GP-1850W only)ANTENNA UNITReceives signal f

10. CUSTOMIZING YOUR UNIT 10-10 The following data can be downloaded/uploaded between a personal computer and this equipment: • Waypoint data (In

10. CUSTOMIZING YOUR UNIT 10-11Waypoint data format 1 2 3 4 5 6 77PFEC, GPwpl, llll.lll, a, yyyyy.yyy, a, c----c, c, c----c, A <CR>

10. CUSTOMIZING YOUR UNIT 10-12 This page is intentionally left blank.

11-111. USING C-MAP NT MODELThe GP-1850WD/1850W C-MAP NT series uses FURUNO mini chart cards and C-MAP NT-FP chart cards. These charts show accurate

11. USING C-MAP NT MODEL 11-2 11.2 Cursor and Data Display Besides its fundamental functions of providing position data, the cursor can also show

11. USING C-MAP NT MODEL 11-3RGWRObjectsNavigation mark, fixedExtended navigational aid, geLightLightLightLightDepth contourLand areaSource of data

11. USING C-MAP NT MODEL 11-4 5. Press the DATE soft key to open the DATE window. DATEDD/MM/YYYY01 / 01 / 2000 DATE window 6. Use ◄ or ► to posit

11. USING C-MAP NT MODEL 11-57. Press the NEAR SRVICE soft key. The SELECT PORT SERVICE window appears. Currently selected iconSELECT PORT SERVICE

11. USING C-MAP NT MODEL 11-6 11.5 Setting Chart Setup Options CHART DETAILS menu 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and

11. USING C-MAP NT MODEL 11-71. With the CHART DETAILS menu displayed, press the DEPTH INFO soft key to show the following display. DGPS 3DRETURND

vi WHAT IS WAAS? WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. An S

11. USING C-MAP NT MODEL 11-8 11.7 Displaying Program Number 1. Press the [MENU] key to open the main menu. 2. Press the CONFIGURATION soft key t

12-112. MAINTENANCE & TROUBLESHOOTING12.1 Maintenance Regular maintenance is essential for good performance. A maintenance program should be esta

12. MAINTENANCE & TROUBLESHOOTING 12-2 12.2 Replacement of Fuse, Battery The fuse on the power cable protects the system from reverse polarity

12. MAINTENANCE & TROUBLESHOOTING 12-312.4 Error Messages This GP-1850W/1850WD displays the following error messages on the alarm menu to alert

12. MAINTENANCE & TROUBLESHOOTING 12-4 PROGRAM: OKNo.14518260**RETURNTESTSRAM: OKDRAM: OKPORT1: OK* PORT2: OK *INTERNALBATTERY: OKGPSRECEIVER:

12. MAINTENANCE & TROUBLESHOOTING 12-5Display test 1. Press the [MENU] key followed by the CONFIGURATION, SYSTEM MENU and SELF TEST soft keys

12. MAINTENANCE & TROUBLESHOOTING 12-6 12.6 Clearing Memories The memory, which stores marks, tracks and initial settings, can be cleared to st

A-1MENU TREEDISPLAY OPTIONSRNG & BRG MODE (GREAT CIRCLE, RHUMB LINE)RANGE/SPEED UNIT (nm/kt, km/km/h, sm/sm/h)DEPTH UNIT (m, ft, fa)TEMP UNIT (°C

MENU TREE A-2 1CONFIGURATIONSETUP NMEA PORT 1SETUP NMEA/DGPS PORT 2FORMAT(NMEA0183Ver.1.5, 2.0)LAT/LON FORMAT(DD°MM.MM', DD°MM.MMM', DD°M

A-3LORAN C CHAINS niahCIRG1S2S3S4S5ScificaPlartneC09941192–––tsaoCtsaEnaidanaC0395115283––)aeroK(noiLodnammoC0795111324––tsaoCtseWnaidanaC0995117214

1-11. OPERATIONAL OVERVIEWThis chapter acquaints you with the basics of your unit - from turning on the power to the soft key menu operation. 1.1 D

A-4 DECCA CHAINS niahC.oNniahCniahCedocnoitacoLniahC.onniahCniahCedocnoitacoL10citlaBhtuoSA0eporuE43otnaKC8napaJ20tednaltseVE0" 53ukokihSC4&qu

A-5WORLD TIME

A-6 GEODETIC CHART LIST001: WGS84 002: WGS72 003: TOKYO : Mean Value (Japan, Korea & Okinawa) 004: NORTH AMERICAN 1927 : Mean Value (CONUS)

SP - 1 E4425S01A-M SPECIFICATIONS OF COLOR GPS/ PLOTTER: GP-1850W COLOR DGPS/ PLOTTER: GP-1850WD 1 GENERAL 1.1 Display 6.5-inch high resolutio

SP - 2 E4425S01A-M 4.8 Electronic Chart FURUNO or NAVIONICS chart card available, C-MAP chart card also available for C-MAP NT Model 5 INTER

Index-1 INDEXA Alarm information window 8-4 ALARM key 8-1 Alarm messages 8-4 Alarms alarm information window 8-4 alarm message 8-4 anchor

INDEX Index-2M Magnetic bearing 10-3 Magnetic variation 10-4 Maintenance 12-1 Mark color 4-3 number used 4-4 entering 4-1 erasing 4-4 line

INDEX Index-3 S SAVE/MOB key 5-1 Sector info (lighthouse viewable angle) 10-2 Setup NMEA port 1 menu 10-9 Setup NMEA port 2 menu 10-9 S