Furuno NAVNET 1724C Bedienungsanleitung PDF herunterladen (Seite 103)

3. PLOTTER OPERATION

3-32

3.8.3 Erasing waypoints

Erasing a waypoint directly from the plotter display

1. Operate the Cursor pad to place the cursor on the waypoint you want to erase. A

flashing diamond mark appears over the waypoint when the waypoint is correctly

selected.

2. Press the CLEAR key. You are asked if you are sure to erase the waypoint.

3. Push the ENTER knob. The waypoint is erased from the plotter screen and the waypoint

list.

Erasing a waypoint from the menu

1. Press the MENU key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key

to open the waypoint menu.

2. Press the WAYPOINT BY CURSOR soft key.

3. Operate the Cursor pad to place the cursor on the waypoint which you want to erase. A

flashing diamond mark appears on the waypoint when it is correctly selected.

4. Press the EDIT/MOVE soft key followed by the ERASE WPT soft key. You are asked if

you are sure to erase the waypoint.

5. Push the ENTER knob to erase the waypoint.

6. Press the MENU key to close the menu. The waypoint is erased from the plotter screen

and the waypoint list.

Erasing a waypoint from the waypoint list

1. Press the MENU key to open the menu.

2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.

3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key.

4. Use the Cursor pad to select the waypoint you want to erase.

5. Press the ERASE WPT soft key. You are asked if you are sure to erase the waypoint.

6. Push the ENTER knob. The waypoint is erased from both the waypoint list and the

plotter screen (if it is currently displayed).

7. Press the MENU key to close the menu.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 246 247

Keine Kommentare

Furuno NAVNET 1724C Bedienungsanleitung Seite 103