Furuno 2127 Bedienungsanleitung PDF herunterladen (Seite 13)

1. MOUNTING

1-5

4. Place the antenna unit on the rubber mat, orienting the unit so the bow mark on its base

is facing the ship’s bow.

Ground

terminal

Rubber

mat

Bow mark

Antenna unit, front view

5. Fasten the antenna unit to the mounting platform with M12x60 hex bolts, nuts, flat

washers and seal washers.

6. Using hex bolt (M6x25), nut (M6) and flat washer (M6), establish the ground system on

the mounting platform as shown below. The location should be within 340 mm of the

ground terminal on the antenna unit. Connect the ground wire (RW-4747, 340 mm,

supplied) between the grounding point and ground terminal on the antenna unit. Coat

the entire ground system with silicone sealant (supplied).

Anticorrosive sealant

Seal washer

Rubber mat

Anticorrosive

sealant

Ground wire

Hex bolt

Hex bolt welded to

ship's superstructure

Hex nut

Spring washer

Anticorrosive

sealant

Flat washer

Anticorrosive sealant

Ground

terminal

Ground

wire

Antenna base

Ground wire

How to mount the antenna unit

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 135 136

Keine Kommentare

Furuno 2127 Bedienungsanleitung Seite 13