Furuno 2127 Bedienungsanleitung PDF herunterladen (Seite 54)

3. SETTING AND ADJUSTMENT

3-16

3.7 Dual Radar Display (non IMO-type only)

The image from two or more radars may be shown together on one radar display. This

allows you to take advantage of the best characteristics radars has to offer.

Image from main radar

Image from

external radar

Separate internal and external

images ("COMBINE" setting)

The following should be done in order to enable the dual radar display:

• Set antenna position correctly on both the main radar and the external radar.

• Select external radar to use, from the DUAL RADAR menu. (See paragraph

3.7.3.)

3.7.1 Enabling/Disabling the Dual Radar Display

Enable or disable the dual radar display as shown in this section.

Note 1: The Tx blanking sector boundary lines are not shown when the dual radar display is

active. Further, neither the internal or external image is shown in the Tx blanking

sector.

Tx blanking sector

Display

area

Dual radar display with

Tx blanking sector

Tx blanking sector is not shown.

No image in Tx blanking sector.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 135 136

Keine Kommentare

Furuno 2127 Bedienungsanleitung Seite 54